PLUS folding seat, fixed height

The seat is foldable.

Overview

PLUS folding seat. For fixed mounting.
Materials: Aluminium, thermoset plastic, plastic.
Incl. mounting kit for brick wall.

PLUS folding seat, fixed height PLUS folding seat, fixed height

Technical specifications

Product group

Folding seats

Description of product

PLUS folding seat. For fixed mounting.
Materials: Aluminium, thermoset plastic, plastic.
Incl. mounting kit for brick wall.

Materials

The folding seat is made out of thermoset plastic, and the mounting and suspension bracket are made from 3/8" anodised aluminium. The end caps are made from ABS plastic.

Color

White

Adjustability

Fixed mounting

Maximum load

Maximum user mass: 960 lbs.
When the seat is loaded with 960 lbs, each wall fastener is loaded with 436 lbs.

The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.

Ergonomics

Ergonomically shaped seat, which offers good and comfortable support. The seat is suitable for situations where additional seating is required and space is limited, - e.g. in kitchens, lifts and hallways.

Functionality

The seat can be folded away when not in use, - or to free up space. Stays up by itself when folded away.

Dimensions (inch)

PLUS folding seat, fixed height

Weight (kg)

4.1

Cleaning instruction


This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
CaviCide

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

Warranty

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.

Product no.: R5510000 EAN 5708590306339 VVS 777531000 RSK 7973939 NRF 7501001 NBS N13:448 FDA INN/D135865