PLUS grab bar, 24''

Powder-coated aluminium, diameter 1.3''

Overview

PLUS grab bar, 24”, diameter 1.3", for fixed mounting.
The 1.3" outside diameter enables the grab bar to be held comfortably and firmly. The projection of 1.5" from the wall makes it easy to take hold of the grab bar.
Inkl. wall rosette, which covers the fixings.
Excl. mounting kit.
See Technical specifications (pdf) for information on mounting kits suitable for various wall types.

PLUS grab bar, 24'' PLUS grab bar, 24''

Technical specifications

Product group

Grab bars

Description of product

PLUS grab bar, 24”, diameter 1.3", for fixed mounting.
The 1.3" outside diameter enables the grab bar to be held comfortably and firmly. The projection of 1.5" from the wall makes it easy to take hold of the grab bar.
Inkl. wall rosette, which covers the fixings.
Material: Powder-coated aluminium and plastic.
Excl. mounting kit.

Materials

Core material: Aluminium
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic

Color

White

Maximum load

Maximum load: 440 lbs.
When the grab bar is loaded with 440 lbs, each wall fastener is loaded with 123 lbs.
Grab bars are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.

Ergonomics

The 1.3" outside diameter enables the grab bar to be held comfortably and firmly. The projection of 1.5" from the wall makes it easy to take hold of.

Dimensions (inch)

PLUS grab bar, 24''

Weight (kg)

0.936

Cleaning instruction


This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
CaviCide

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

Warranty

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.

Product no.: RT024000 EAN 5708590333977