PLUS sink bracket with lever control, manually height adjustable with pneumatic cylinder

Can be height adjusted 11.8" from 26.3" to 38.1". For MATRIX CURVE and MATRIX SMALL sinks

Overview

PLUS sink bracket, pneumatic-assisted. The lever control is placed at the front of the sink. The lever control can also be used as a towel rail and can be placed on either side of the sink. Manually height adjustable by 11.8" (stepless) and adjustable horizontally. Recommendation: Flexible feed and waste system R2064/R2065. (UK markets R2074/R2075).
Materials: Aluminium and ABS polymer.
Incl. mounting bolts for sink. For mounting on horizontal wall track (not included).

PLUS sink bracket with lever control, manually height adjustable with pneumatic cylinder PLUS sink bracket with lever control, manually height adjustable with pneumatic cylinder

Technical specifications

Product group

Sink brackets

Description of product

PLUS sink bracket, pneumatic-assisted. The lever control is placed at the front of the sink. The lever control can also be used as a towel rail and can be placed on either side of the sink. Manually height adjustable by 11.8" (stepless) and adjustable horizontally. Recommendation: Flexible feed and waste system R2064/R2065. (UK markets R2074/R2075).
Materials: Aluminium and ABS polymer.
Incl. mounting bolts for sink. For mounting on horizontal wall track (not included).

Materials

The sink bracket is primarily made of 3/8" anodized aluminium. The ends of the bracket cover are capped with ABS polymer. The bracket is available with a lever control consisting of an ABS polymer switch at the end of an anodized aluminium arm

Adjustability

Height and horizontally adjustable

Adjustment interval (inch)

11.82

Maximum load

This product has been tested statically up to 440 lbs. As the European standard for technical aids for disabled, EN 12182:2012, requires a static test with safety factor 1.5, the nominal maximum load for this product is therefore 300 lbs.

Ergonomics

The height of the sink is easily adjusted the lever control. The sink bracket is compatible with all types of bolt-mounted sink. It's rounded, sleek design makes it easy to clean thoroughly.

Functionality

The arm that holds the lever control can function as a towel bar. The lever control can be placed on the right- or left-hand side of the sink. This sink bracket is supplied as standard with a pneumatic cylinder for sinks weighing 35.3-48.5 lbs, however, it is possible to order it for sinks weighing 17.6-26.5 lbs or 26.5-35.3 lbs.

Dimensions (inch)

PLUS sink bracket with lever control, manually height adjustable with pneumatic cylinder

Weight (kg)

13.5

Cleaning instruction


This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
CaviCide

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

Warranty

Pressalit Care makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.

Product no.: R4680 EAN 5708590309446 HMI 71757 VVS 654002200 RSK 7972591 NRF 6132533 NBS N13:30,335 FDA ILW/D142473