VALUE II shower seat, fixed height

The seat is foldable


VALUE ll folding shower seat, fixed height.
Ergonomically curved seat with antislip surface, removeable without the use of tools, for easy cleaning.
Incl. fixing bolts for brick wall. Plugs depend on wall type and must be ordered separately.

VALUE II shower seat, fixed height
VALUE II shower seat, fixed height

Technical specifications

Product group

Shower seats

Description of product

VALUE II shower seat. Fixed height. The seat is foldable.
Materials: Diecast aluminium, Rilsan-coated stainless steel and vacuum-moulded polyethylene (PE).
Incl. mounting bolts for brick wall. Plugs depend on wall type and must be ordered separately.


The wall profile is made of diecast aluminium, and the frame is made of Rilsan-coated stainless steel. Rilsan provides good protection against corrosion and is comfortable to touch and easy to clean.The seat is made of vacuum-moulded polyethylene (PE).


Anthracite grey


Fixed mounting

Maximum load

Maximum user mass: 275 lbs.
When the seat is loaded with 275 lbs, each wall fastener is loaded with 209 lbs.

The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.

Dimensions (inch)

VALUE II shower seat, fixed height

Weight (kg)


Cleaning instruction

This product should be cleaned with hot water or a mild cleaning solution.
Do not use corrosive or abrasive cleaners as it may result in the surface being damaged.
For surface disinfection, chlorine-based disinfectants may be used according to the product specification and safety precautions for these products.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.


The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.


Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.

Product no.: R1610000112 EAN 5708590355108 VVS 777525012