PLUS shower seat 310, fixed height

The seat is foldable.


PLUS shower seat 310. For fixed mounting. The seat is foldable.
Excl. mounting kit.
See Technical specifications (pdf) for information on mounting kits suitable for various wall types.
Replaces R7310

PLUS shower seat 310, fixed height PLUS shower seat 310, fixed height

Technical specifications

Product group

Shower seats

Description of product

PLUS shower seat 310. For fixed mounting. The seat is foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile.
Excl. mounting kit.
Replaces R7310


The shower seat is made of polyurethane (PU) foam with a plywood core and this is covered with a moulded coated surface that is protected using a clear PU lacquer. Internal components and fasteners are primarily made of stainless steel. The hinge barrel is capped with ABS.




Fixed mounting

Maximum load

Maximum user mass: 440 lbs.
When the seat is loaded with 440 lbs, each wall fastener is loaded with 187 lbs.

The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.


Ergonomically designed seat - contact surface are 12.2" x 14.4". Soft and slip-resistant material that has a warm feel.


The seat can fold up when not in use or to maximize floor space.

Dimensions (inch)

PLUS shower seat 310, fixed height

Weight (kg)


Cleaning instruction

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.


The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.


Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.

Product no.: R7304026 EAN 5708590359298